Day 20 – Electrical Conduit, Cabinets, and Drivers Floor area being prepped.

Nov. 18th, 2017 – I finished installing the flexible electrical conduit down both sides of the bus.  It will house the 14/2 wiring for the 15 amp circuits, and the 12/2 wiring for the (2) 20 amp circuits.

 

I also purchased the first cabinet to go over the drivers side wheel well right behind the drivers seat.  I placed the Pergo flooring temporarily underneath it to see how the color matched.  I’m happy with it.

IMG_0105

The last thing I did that day was to prep the drivers floor area to get it ready for the new 1/8 inch diamond plate that I will be putting down.